Advertisement
BASIC MAINTENANCE
2.1 CORRECT MAINTENANCE PROCEDURE
In order to maintain the reliability of the track systems, regular maintenance is essential. It is
imperative that the tracks are maintained as outlined within this maintenance section.
ALWAYS:
• Perform maintenance on a level and solid surface.
• Ensure the track system is solidly supported if work is necessary under the track
systems.
• Remove any build-up of grease, oil or debris.
• Repair all damage and replace worn or broken parts immediately.
• Check for oil leaks and damaged hydraulic hoses.
• Use only specified lubricants. Do not mix different brands or types.
• Use great care when maintaining the hydraulic system since oil may be very hot when
the machine has just been working.
• Use only supplied / approved replacement parts. Use of unapproved parts will invalidate
the warranty.
• Dispose of lubricants in the proper manner.
• Dispose of worn tracks in the proper manner.
2.2 MAINTENANCE CHECKS
Please note the maintenance intervals specified below are for track systems working under
normal conditions. If the track system is used in severe working conditions, the maintenance
and safety checks must be performed more frequently. Particularly the monthly checks, which
should be performed weekly or even daily in extreme cases.
Service Hours
Every 10
Scheduled
Check
Undercarriage
Task
Every 10
Initial 250
Inspect
Change Final
Track
Drive Oil
Adjustment
Every 250
Every 500
Take Final
Check Final
Drive Oil
Drive Oil
Sample
Every 1000
Change Final
Drive Oil
7
Advertisement
