Advertisement
HYDRAULIC OIL COOLER
(only on remote control machines)
• A hydraulic oil cooler is installed on remote
controlled machines to keep the hydraulic
oil from overheating. There is a sensor in the
bottom of the oil cooler which activates the
cooling fan if the oil temperature rises to
140° or higher. Depending on the
environment and the operation of the
grinder, the fan may go on and off as the
temperature of the oil fluctuates.
• Keep oil cooler fins clean. Use a garden
hose and a mild detergent.
CAUTION
Do Not use a power washer as it may cause
the fins to bend.
Do Not use an industrial strength detergent
that may cause the metal to deteriorate.
• Inspect all connections and hoses for leaks
and wear. Replace if necessary.
Hydraulic oil is under pressure. Spraying fluid from a leak
can burn or penetrate the skin and cause serious injury. If
fluid penetrates the skin, immediately seek medical attention
to have it surgically removed! Always wear eye protection!
SP6016
!
WARNING
SERVICING HYDRAULICS
44
Advertisement
