Advertisement
REPLACE STUB SHAFT (CONT.)
• Remove the jackshaft sheave. Remove the
bolts in the jackshaft sheave and screw them
back into the empty threaded holes to push
the sheave off the bushing and remove the
bushing and sheave. Make sure to keep all
machine parts and hardware together to
make reassembly easier.
• Remove the bolts holding the belt guard
onto the machine and remove the belt guard.
• Remove engine sheave by first removing
bolts on outer stub shaft plate.
*(5/16-18 x 3/4" bolt, use 1/2" socket).
SP6016
SERVICING STUB SHAFT
52
Advertisement
