Advertisement
• Check cutter wheel, pockets, and teeth for
wear (Daily). If any repair is needed, see
Servicing Cutter Wheel section for further
instructions. DO NOT OPERATE
STUMP CUTTER WITHOUT A
COMPLETE SET OF TEETH.
• Check setscrews in jackshaft bearings for
tightness (Weekly). NOTE: to access the
jackshaft bearings, you will need to remove
the jackshaft cover.
• Check setscrews in cutter wheel bearings for
tightness (Weekly).
• Clean out Poly Chain
bottom portion of guard (Weekly).
Woodchip buildup will wear or break
Poly Chain
belt.
®
SP6016
guard by removing
®
MACHINE MAINTENANCE
28
Advertisement
