Ean-13 Beginning With 290 Add-On Code Required - Newland NLS-HR42 User Manual

EAN-13 Beginning with 290 Add-On Code Required

This setting programs the scanner to require an add-on code (2-digit or 5-digit) on EAN-13 barcodes that begin with "290".
The following settings can be programmed:
Require Add-On Code: All EAN-13 barcodes that begin with "290" must have a 2-digit or 5-digit add-on code. The EAN-13
barcode with the add-on code is then transmitted. If the required add-on code is not found, the EAN-13 barcode is
discarded.
Do Not Require Add-On Code: If you have selected Require Add-On Code, and you want to disable this feature, scan
Do Not Require Add-On Code. EAN-13 barcodes are handled, depending on your selection for the "Add-On Code
Required" feature.
** Do Not Require Add-On Code Require Add-On Code
81