Add‐On Code Required
When EAN‐13 Add‐On Code Required is selected, the scanner will only read EAN‐13 barcodes that contain add‐on codes.
** EAN‐13 Add‐On Code Not Required
Add‐On Code Separator
When this feature is on, there is a space between the data from the barcode and the data from the add‐on code. When turned off,
there is no space.
** Off
EAN‐13 Beginning with 290 Add‐On Code Required
Require Add‐On Code: All EAN‐13 barcodes that begin with "290" must have a 2‐digit or 5‐digit add‐on code. The EAN‐13
barcode with the add‐on code is then transmitted. If the required add‐on code is not found, the EAN‐13 barcode is discarded.
Do Not Require Add‐On Code: If you have selected Require Add‐On Code, and you want to disable this feature, scan Do Not
Require Add‐On Code. EAN‐13 barcodes are handled, depending on your selection for the "Add‐On Code Required" feature.
** Do Not Require Add‐On Code
85 **Exit Setup
Enter Setup
EAN‐13 Add‐On Code Required
On
Require Add‐On Code