Table of Contents
Advertisement
USB Interface
When the EM3095 is connected to a host device through its USB interface, USB DATAPIPE is enabled
by default. User can switch between options – USB DATAPIPE, USB HID-KBW, USB COM Port
Emulation and HID-POS, upon actual need.
USB DATAPIPE
A driver is required when using this protocol to communicate with the engine.
** USB DATAPIPE
USB HID-KBW
When the engine is connected to the Host via a USB connection, you can enable the USB HID-KBW
feature by scanning the barcode below. Then the engine's transmission will be simulated as USB
keyboard input. The Host receives keystrokes on the virtual keyboard. It works on a Plug and Play basis
and no driver is required.
USB HID-KBW
30
Advertisement
Table of Contents
