Enter Setup
USB Interface
USB Enumeration
If the scanner is connected to the host defice via a USB connection, the scanner will be enumerated
using S/N or "00000000" after power-up. Enumeration using S/N enables the host device to distinguish
even between scanners of same model. Enumeration using "00000000" disables the host device from
distinguishing between scanners of same model.
Driver installation is required for each USB device distinguished from others by the host device in the
process of enumeration.
** Enumeration Using "00000000"
Enumeration Using S/N
USB HID-KBW
When you connect the scanner to the host device via a USB connection, the USB HID-KBW feature is
enabled by default. Then scanner's transmission will be simulated as USB keyboard input. The host
device receives keystrokes on the virtual keyboard. It works on a Plug and Play basis and no driver is
required.
**
USB HID-KBW
** Exit Setup
16