Table 4-7 Settings Lan - Thales VesseLINK Certus 350 User Manual

Section
LAN Ports
LAN Port 1 1
LAN Port 2
LAN Port 3
Static Routes
Static Route
LAN MAC Address
MAC Address
DHCP
Enable DHCP
IP Address
Mask
Start
End
Lease Time
DHCP Reservations
Name
Duration
MAC
Address
Enabled/Disabled
User Manual PN 84469 Rev L
Table 4-7 Settings
POE OFF / POE ON (POE ON is the default setting)
Disable POE OFF / POE ON (POE ON is the default setting)
Disabled / Enabled (Enabled is the default setting)
POE OFF / POE ON (POE ON is the default setting)
Disabled / Enabled (Enabled is the default setting)
Enter the Name, Subnet IP Address, Subnet Prefix, and Gateway IP
address for the static route
(Note: The Gateway address assigned to the router that connects the
terminal to the network.)
Enter the MAC address (same for all LAN switches)
Disabled / Enabled (Enabled is the default setting)
Enter the IP Address
Enter the Mask Number
Enter the starting value for the octet
Enter the ending value for the octet
Enter the Lease Time being allotted (in seconds)
Enter the name of the DHCP Reservation
Enter the length of time (in seconds, min of 120 seconds)
Enter the MAC address
Enter the last digits of the IP Address
Disabled / Enabled (Enabled is the default setting)

LAN
Value
4-27