Section
Data Configuration
Data Session
Data Route - Primary
Data Route -
Alternate
Disable Data on Boot
Port Forwarding
Port Forwarding
User Manual PN 84469 Rev L
Figure 4-36 Settings
Table 4-12 Settings
Deactivate / Activate (deactivate is the default setting)
Select the desired data route (WAN or Satellite Port) (WAN is the
default setting).
Select the desired alternate data route. (Satellite is the default setting)
Note: If Satellite is selected, the available options are WAN Port or
Disabled.
If WAN Port is selected, the available options are Satellite or
Disabled.
NO / YES (NO is the default setting). Determines the default data
operations state when the system is restarted.
Enter the External Port, Internal Port, Internal IP Address, and
Protocol. Up to seven ports can be forwarded in the range of 1 -
53247. Ports greater than 53247 cannot be forwarded.
Data Screen
Data
Value
4-46