3.) In order to bring up the phone's configuration page in a browser, one needs to find the IP
address of the connected phone. This is accomplished by going to the Management Portal
and entering STATUS CURRENT DEVICES. In this example, the CISCO SPA504G
has an IP address of 192.168.55.106 as shown in Figure 4-30 below.
4.) Using a web browser, use the IP address found in step 3 to go to the CISCO SPA504G
phone configuration page and go to Admin Login at the upper right of the menu (after you
do this "User Login" will appear). Select VoiceExt 1.
a. In the Proxy field, enter "sip.thaleslink".
User Manual PN 84469 Rev L
Figure 4-29 VOIP Phone Settings
Figure 4-30 CISCO SPA504G IP Address
4-35