Regional Settings - Thales MobileMapper CE Getting Started Manual

All manuals and user guides at all-guides.com
MM CE GS Guide.book Page 8 Monday, June 20, 2005 11:04 AM

Regional Settings

MobileMapper CE supports code sets and languages sup-
ported by Windows CE operating system. These include Eu-
ropean languages as well as multibyte languages such as
simplified Chinese, Korean (in a subsequent release) and
Japanese.
- From MobileMapper CE Companion CD, copy the
- On the device, double tap on the .CAB file.
- The default location for installation is "\MyDe-
- Select the
- Select your preferred locale and user interface language
- Once the language is installed, shutdown the unit by
- Next time you boot the MobileMapper CE device, the
8
appropriate language install files (.CAB) to your
MobileMapper CE device. Use either an SD Card or
download the files to the unit using ActiveSync.
vice\Intl\####\" (where #### is the language number).
You must install to this default location when the dia-
log box appears asking where to install.
Settings>Control panel>Regional Set-
tab, then
tings
.
as shown on the screen below (left).
selecting successively the
Full Shut Down Mode
the Shut Down menu, then
screen below, right) and then the
selected language will be used.
Suspend
tab, then to open
(see
OK
button.