Table of Contents
Advertisement
NOTE
LAN Status Icons – The LAN Status icons (LAN 1, LAN 2 and LAN 3) provide a quick
view of each LAN's Status. Each LAN icon is highlighted in blue when a device is
plugged into it. By selecting a LAN icon, the additional information in Error! Reference
source not found. is shown, displaying the "Link Status" and allowing for turning the
Power over Ethernet (PoE) ON or OFF for that LAN, as well as enabling or disabling the
PAN port. Only LAN 2 and 3 can be disabled. LAN port 1 is always enabled to prevent a
situation where the terminal cannot be accessed. Changes will only take effect once SAVE
CHANGES is selected.
Figure 4-5 Quick Link – LAN 1and Lan 2 Status (LAN 3 similar)
WAN Status – The WAN Status icon provides a quick view of the current connection
status of the WAN port. The WAN Status icon will be highlighted in blue when an
external WAN device is plugged into it. By selecting the WAN icon, the additional
information in Figure 4-6 is shown. The details provided on this screen are for
information only and include "WAN Port State", "Internet Connection" and "Current Data
Path"
User Manual PN 84469 Rev L
If connected to the terminal through a Wi-Fi connection,
disabling the Wi-Fi causes loss of the Wi-Fi signal and removal
from the wireless device's Wi-Fi menu. To regain use of the Wi-
Fi, connect a computer via supplied Ethernet cable to the BDU,
open the Management Portal, select the Wi-Fi Status icon and
select ENABLE.
Figure 4-4 Quick Link – Wi-Fi Status
4-6
Advertisement
Table of Contents
