Thales VesseLINK Certus 350 User Manual page 67

Phone
NOTE
The Phone Settings page, shown in Figure 4-28, allows configuration of phone extensions and
mapping of those extensions to the outbound Iridium phone lines as well as which extension rings
for each inbound Iridium line. There are up to three (3) high quality Iridium phone lines. Each
extension can be mapped to one, two, three or none of the Iridium phone lines for outbound calls
by checking the box next to the corresponding Line in the Outbound Lines column. By selecting
the icon, a password can be entered for each extension if desired. An extension can be
deleted by selecting the
selected.
Each of the three Iridium phone lines (Inbound) can be mapped to ring only one extension. The
extension is selected from the pull-down menu. Configuration of analog devices such as the
POTS phones and the Radio Gateway are configured on this page. Each of these devices can be
mapped to an extension.
Finally, in the Phone Configuration area, call logs can be enabled or disabled and the POTS
phone impedance can be selected for optimal performance.
When adding an extension, it is always necessary to first select the
selecting the
multiple times, and then selecting the
extension can always be edited or deleted selecting the
button to save. If the
the data will not be saved. Table 4-9 describes the settings in more detail.
User Manual PN 84469 Rev L
This is an ADMIN functional only. If the user sees this
login as the ADMIN to continue. Otherwise this is a view only
screen.
icon. All changes are saved only after the APPLY button is
button. Several extensions can be added by selecting the
button is not selected before leaving the Phone menu item,
button. After selecting the
buttons BEFORE selecting the
icon,
button BEFORE
button
button, the
4-31