Thales VesseLINK Certus 350 User Manual page 91

Section
Output GPIO Pin GPIO 6 / GPIO 13
Connected Integer in seconds. Multiples of 5 are valid with a minimum of 5. Default
Trigger Duration is 10.
Disconnected Integer in seconds. Multiples of 5 are valid with a minimum of 5. Default
Trigger Duration is 60.
Location Services
From the Location Services page, shown in Figure 4-, Location Services are enabled and disabled
and the settings are configured (when enabled). A Location Services server is required to interact
with Thales's open protocol. Contact Thales Customer Support for details.
User Manual PN 84469 Rev L

Figure 4-42 Settings
Value
Location Services Screen
4-55