Table of Contents
Advertisement
Backup Configuration
o Connect a computer to the BDU either through Ethernet or Wi-Fi
o Select BACKUP, will automatically backup the data contained in the Management
Portal.
o The backup file can be renamed as long as the file extension is ".json"
NOTE: This is very useful for restoring setting to a replacement unit or cloning
setup for multi-units.
Restore Configuration
o In the event the configuration file needs to be reloaded, RESTORE
CONFIGURATION will enable you to reload a previous saved configuration file.
o Select RESTORE CONFIGURATION
o Navigate to the file that was saved.
o Open the file to Upload
NOTE
Data Usage
NOTE
Refer to Figure 4-. Data usage is shown for information purposes only. If there is a data limit set,
this information will be provided on this screen. Satellite Data Session is the data used since the
last power-up. Satellite Data Total is the data used since the last reset (manual or automatic).
The system data usage can be reset to restart the data count. Select RESET and then YES, RESET
to confirm. Otherwise, select NO, CANCEL (Figure 4-). For Satellite Data Limits – pressing the
VIEW SATELLITE SETTINGS button, will bring up the SETTINGS SATELLITE Screen
(Figure 4-24).
NOTE
User Manual PN 84469 Rev L
Config files dating back to software version 2.1.0 are supported.
This will apply for future software releases unless otherwise
.
noted
This is an ADMIN functional only. If the user sees this
login as the ADMIN to continue. Otherwise this is a view only
screen.
This is an estimate of data used and does not accurately
represent the billable data total. It also does not limit or restrict
data usage even if the Data Usage exceeds the Data Cap. To get
accurate data usage, please contact your service provider.
icon,
4-57
Advertisement
Table of Contents
