Encoder Configuration - gefran POS-MINI SIEIDrive Instruction Manual

3.9. ENCODER CONFIGURATION

This page allows to perform the encoder configuration.
1
2
3
4
1. It selects the encoder (Enc 1, Enc 2)
2. It sets the encoder initialization registers.
3. It configures the Override.
4. It selects the Target Pos 1 source.
Flag:
a- Feed Rate source if the analog input reference has been selected.
b- Value obtained after the scaling procedure if the value source is selected by the analog input.
22
GEFRAN
—————— Instruction manual ——————
a
b