Digital Input Configuration 1; Digital Input Configuration 2 - gefran POS-MINI SIEIDrive Instruction Manual

3.5. DIGITAL INPUT CONFIGURATION 1

This is the first page which allows to combine the digital inputs with the positioner commands.
1
2
3
4
1. It configures the hold command.
2. It configures the positioner enabling command.
3. It configures the Jog+ command.
4. It configures the Move1 command.
5. It configures the Cycle0 command.
6. It configures the Jog- command.
7. It configures the Move2 command.
8. it goes to the second configuration page of the digital input.
9. It goes to the third configuration page of the digital input.

3.5.1. Digital Input Configuration 2

This is the second page which allows to combine the digital inputs with the positioner commands.
1
3
1. It configures the IncrJog+ command.
2. It configures the IncrJog- command.
3. It configures the Move3 command.
As for the configuration of the Digital Configuration 3, see the page "MoveN Command Configuration".
The page "ADVANCED" is reserved for an internal use.
One-axis positioner
—————— Instruction manual ——————
5
6
7
8
9
2
17