Move 2 Command Configuration; Move N Command Configuration - gefran POS-MINI SIEIDrive Instruction Manual

3.7.2. Move 2 Command Configuration

5
6
1. Value to be reached.
2. Speed of the MOVE 2 command.
3. Acceleration of the MOVE 2 command.
4. Jerk of the Move 2 command.
5. It selects the source of the Move 2 command.
6. It selects the source of Target Pos 2.
7. Setting of the reached value threshold.

3.7.3. Move N Command Configuration

1
2
1. It selects the enabling of the digital input selection.
2. It configures the Move N command with a Multiplexer mode.
20
GEFRAN
—————— Instruction manual ——————
1 2 3
4
7