Table of Contents
Advertisement
3.3. POSITION SET
From 01-12 Set pages to 61-64 Set pages it is possible to set the position Sets with their specific speeds and
accelerations.
1
15
16
6
1. This column shows the Set number;
2. This column shows the value stored into the Set. Such value can be set automatically or by hand;
3. This column shows and allows to set the Set speed;
4. This column shows and allows to set the Set acceleration;
5. This column allows to set the Set value by hand;
6. It forces the end of a movement;
7. It controls the execution of the IncrJog+ and IncrJog- movements, allowing to set the movement
space. The speed and the acceleration can be changed in the Command page;
8. Present override with specific increasing and decreasing buttons;
9. It performs the MoveN command allowing to set the number of the Set to be performed;
10. It controls the execution of the Jog+ and Jog- movements. The speed and the acceleration can be
changed in the Command page;
11. Value of the present Memo Set index;
12. Value of the required Memo Set index;
13. Increasing and decreasing of the Memo Set index;
14. Value Memo command;
15. Axis Ideal value;
16. Axis Real value;
One-axis positioner
2
3
7
8
—————— Instruction manual ——————
4
5
9
10
14
13
11
12
15
Advertisement
Table of Contents
