Gooxi R Series User Manual page 41

into the specific place so as to avoid wrong installation.
3.3.2 内存支持规格
Memory support
该 主板 支 持 4GB/8GB/16GB 与 32GB 的 R-DIMM 或 32GB 与 64GB 的 LR-DIMM 与
NVDIMM 的 DDR4 内存，最高可支持 2133MHz（2133MT/s 仅在每通道单根内存时达到） 。
始终使用相同的大小，类型和速度的内存模块。如需最佳内存性能，需将内存条安装在同一
颜色的双 DIMM 插槽。
The motherboard supports 4GB/8GB/16GB/32GB R-DIMM memory or 32GB/64GB
LR-DIMM/NVDIMM DDR4 memory. It supports 2,133MHz maximally (2,133MT/s can only be
realized when each channel contains a single memory module.) Only the memory module of the
same size, type and speed can be used all the time. If the optimal memory performance is required,
the memory module shall be installed in the DIMM slot of the same color.
安装：垂直插入内存模块并按下内存插槽卡扣位置，注意到对准凹口的底部。
Installation: Insert vertically the memory module and press down the buckling device to align
with the bottom of the cove.
缺口 Notch
模拟插入内存条的演示图：
See the following schematic diagram for the insertion of memory module.
拆卸： 用拇指轻轻一推内存模块插槽的两端附近的释放卡舌。这应该将内存从插槽中释
放出来。
Removal: Use thumbs to open the releasing device near two ends of the memory module slot
to release the memory from the slot.
深圳市国鑫恒宇科技有限公司 Shenzhen Guoxin Hengyu Technology Co., Ltd.
深圳市国鑫恒运信息安全有限公司
凹口 Cove
缺口 Notch
41