A1.3 Screen Selection And Data Entry/Edit Methods - Thermo Scientific Sarasota 2000 User Manual

Sarasota 2000 Ultrasonic Multipath
Flowmeter

A1.3 Screen selection and data entry/edit methods

A1.3.1 MENU screens (including GATEWAY setup menu)
The selection of items from a MENU screen is made as follows:
(a) highlight selection using the UP and DOWN arrow keys
(b) confirm selection by pressing the ENTER key
(c) the selected screen will open and overlay the previous screen
(d) to return to menu screen press ESCAPE or, on completion of data
modification, press ENTER to confirm and return to previous screen
A1.3.2 ENTRY/EDIT screens (including GATEWAY password)
ENTRY/EDIT screens are used to enter or edit data to configure the flowmeter as required.
Data is either entered in alphanumeric format, or chosen from a predefined selection.
Numeric format
Data entry/modification required in numeric format is indicated throughout the following
screen examples by square brackets, [.....]. The value is modified by:
a) highlighting data entry point [....] using UP and DOWN arrow keys
b) position the cursor within the data entry point using LEFT and RIGHT arrow keys
c) enter values using the numeric keypad
d) save new values for entire screen by pressing the ENTER key
Alphanumeric format
Data entry/modification may be in alphanumeric format where indicated by square brackets
and alphanumeric characters, [abc123]. An alphanumeric character is modified by:
a) highlighting data entry point [abc123] using UP and DOWN arrow keys
b) select Text On mode using soft key 3
c) move the cursor into position within the data entry point using LEFT and RIGHT
arrow keys
d) use UP and DOWN arrow keys to scroll through available alphanumeric
characters
e) when alphanumeric modification is complete, select Text Off mode using soft key
3
f) modified text/values are saved for entire screen by pressing the ENTER key
g) available characters include:
ABCDEFGHIJKLMNOPQRSTUVWXYZ[¥]^_`abcdefghijklmnopqrstuvwxyz
Parameter selection
The selection of configuration parameters from a predefined list is indicated on the screen
examples by xxxxxxxx. The parameters available for selection are listed beneath each
screen. The parameter is selected by:
a) highlighting the parameter selection point using UP and DOWN arrow keys
b) scrolling through available parameters using LEFT and RIGHT arrow keys
Appendix 1 SCREEN FLOW DIAGRAMS, Page A1-7
APPENDIX 1 LCD SCREENS
Thermo Fisher Scientific