Lexmark Pro715 User Manual page 160

Error Message:
Fax Modem Error
Phone Line is connected to
the incorrect jack on the
back of the machine.
Digital line detected
Failed to Connect
Phone Line Error
Phone Line Not Connected
Phone Line Busy
No Answer
What it indicates:
The fax modem of the printer may be
busy, or the fax modem may have
encountered problems during
transmission.
The telephone cable is connected to
the wrong port on the back of the
printer.
The printer is connected to a digital
line.
The printer cannot detect a dial tone.
Your telephone line or the telephone
line of the receiving fax machine is
busy. This happens especially if the
printer is sharing the line with other
devices (telephone, answering
machine).
Auto Answer may have been turned
off on the receiving fax machine.
Troubleshooting
160
Possible solutions:
Turn off the printer, turn it back on,
and then resend the fax.
Connect the phone cable to the
port on the back of the printer.
The printer is an analog device and
must be connected to an analog line.
To connect the printer to a digital line,
you must use a digital line converter
or a filter.
For more information, see the "Setting
up the printer to fax" section.
See the "Fax troubleshooting
checklist."
• Set the printer to redial.
•
Increase the time between the
redial attempts.
•
Place a test call to the number to
which you want to send a fax to
make sure that it is working
correctly.
•
If the telephone line is being used
by another device, then wait until
the other device is finished before
sending the fax.
•
Schedule to resend the fax at a
later time.
•
Set the printer to scan before
dialing. The scanned document is
saved in the printer memory. The
printer can then retrieve it and
automatically redial the number.
•
Verify the number, and then
resend the fax.
•
Set the printer to redial.
Note: Depending on your country
or region, there may be a limit on
the number of redial attempts,
regardless of the redial settings
that you set in your printer.
• Schedule to resend the fax at a
later time.