Scanner Adf Cover Open; Scanner Disabled; Short Paper - Lexmark Pro715 User Manual

Notes:
• Cleaning the printhead nozzles uses ink, so clean them only when necessary.
•
Deep cleaning uses more ink, so try the Clean Printhead option first to save ink.
• If the ink levels are too low, then you must replace the ink cartridges before you can clean the printhead
nozzles.
•
See the User's Guide for more information on how to clean the printhead nozzles.
Replace Ink Cartridge
Try one or more of the following:
•
Replace the ink cartridge with one that is supported by your printer.
•
Press to clear the message.
•
See the User's Guide or visit the Lexmark Support Web site at http://support.lexmark.com for a list of supported
ink cartridges.
Scanned Document Too Long
The scan job exceeds the maximum number of pages. Press

Scanner ADF Cover Open

Try one or more of the following:
•
Close the ADF cover to clear the message.
•
Press to cancel the current scan job.

Scanner Disabled

Try one or more of the following:
• Check the printer software settings or the Administration settings from the printer to enable the scanner.
For more information, contact customer support.
•
Press to clear the message.

Short Paper

Try one or more of the following:
•
Touch OK or press
•
Make sure the paper size is correctly set.
•
Load paper with the correct size in the tray or on the paper support.
• Check the paper guides, and then make sure the paper is properly loaded in the tray or on the paper support.
•
Cancel the current print job.
, depending on your printer model.
to clear the message and cancel the current scan job.
Troubleshooting
143