Paper Or Specialty Media Misfeeds - Lexmark Pro715 User Manual

2
Firmly grasp the paper on both sides, and then gently pull it out.
Note: Make sure all paper fragments are removed.
3
Reattach the ADF tray until it snaps into place.
4
Touch OK or press

Paper or specialty media misfeeds

These are possible solutions if paper or specialty media misfeeds or skews, or if multiple sheets feed or stick
together. Try one or more of the following:
C
HECK PAPER CONDITION
Use only new, unwrinkled paper.
C
HECK PAPER LOADING
•
Load a smaller amount of paper into the printer.
•
Load paper with the print side facedown. (If you are not sure which side is the printable side, see the
instructions that came with the paper.)
• Check the loading instructions for your paper or specialty media.
R
EMOVE EACH PAGE AS IT IS PRINTED
A
DJUST THE PAPER GUIDES TO FIT THE LOADED PAPER
, depending on your printer model.
Troubleshooting
150