Scanning; Tips For Scanning; Scanning To A Local Computer - Lexmark Pro715 User Manual

Scanning

ADF
Use the ADF for multiple‑page documents.
Note: The ADF is available only on select models. If you
purchased a printer without an ADF, then load original
documents or photos on the scanner glass.

Tips for scanning

• Use the scanner glass when scanning two‑sided pages if your printer does not support duplex scanning or the
ADF does not support the original document size.
•
When using the ADF, adjust the paper guide on the ADF to the width of the original document.
• When using the scanner glass, close the scanner cover, if possible, to avoid dark edges on the scanned image.
•
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF. Place these items on the scanner glass.
• When the document to be scanned is in place with the settings you want, press

Scanning to a local computer

1
Load the original document.
2
From the printer control panel, navigate to:
> Scan > Computer > USB‑Connected Computer
The USB‑connected computer will receive the scan by default.
Note: Make sure the scan software is installed on the destination computer.
3
Press the up or down arrow button to scroll to the file type you want.
Scanner glass
Use the scanner glass for single pages, small items (such
as postcards or photos), transparencies, photo paper, or
thin media (such as magazine clippings).
Scanning
64
to start scanning.