Copying; Tips For Copying; Making Copies - Lexmark Pro715 User Manual

Copying

ADF
Use the ADF for multiple‑page documents.
Note: The ADF is available only on select models. If you
purchased a printer without an ADF, then load original
documents or photos on the scanner glass.

Tips for copying

•
Make sure you load the original document faceup into the ADF or facedown at the placement corner of the
scanner glass.
•
When using the ADF, adjust the paper guide on the ADF to the width of the original document.
•
When using the scanner glass, close the scanner cover, if possible, to avoid dark edges on the scanned image.
•
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF. Place these items on the scanner glass.
•
When the document to be copied is in place with the settings you want, press

Making copies

1
Load paper.
2
Load an original document faceup into the ADF or facedown on the scanner glass.
3
From the printer control panel, navigate to:
> Copy > > Copies
4
Press the left or right arrow button to select the number of copies.
5
From the Copy menu screen, press the up or down arrow button to scroll to the option you want to set, and then
press the left or right arrow button to scroll to the setting you want. If necessary, press
Scanner glass
Use the scanner glass for single pages, small items (such
as postcards or photos), transparencies, photo paper, or
thin media (such as magazine clippings).
Copying
58
to start copying.
to make a selection.