Receiving Faxes; Tips For Receiving Faxes; Receiving Faxes Automatically; Receiving Faxes Manually - Lexmark Pro715 User Manual

Receiving faxes

Tips for receiving faxes

When receiving faxes:
•
Make sure that the printer is on and connected to a working telephone, DSL, or VoIP line. The line is working if
you hear a dial tone.
• If you set the printer to receive faxes manually (Auto Answer Off), then make sure that the ringer volume is not
set to Off.
•
If you have set the printer to receive faxes automatically (Auto Answer On), then load paper in the printer.

Receiving faxes automatically

1
Make sure that Auto Answer is on:
From the printer control panel, navigate to:
> Setup > > Fax Setup >
2
Set the number of rings before the printer picks up incoming faxes:
a
Press the arrow buttons to scroll to Pick Up On, and then press
b
Press the arrow buttons to scroll to the number of rings that you want, and then press
When the number of rings you set is detected, the printer automatically receives the incoming fax.
Warning—Potential Damage: Do not touch the cables or the
Tips:
• If the printer is sharing the line with other analog devices (telephone, answering machine), then set the printer
to pick up calls two rings after the answering machine. For example, if the answering machine picks up calls after
four rings, then set the printer to pick up after six rings. This way, the answering machine picks up calls first and
your voice calls are received. If the call is a fax, then the printer detects the fax signal on the line and takes over
the call. If the printer is on a dedicated fax line, then you may set the printer to pick up on any number of rings.
•
If you have multiple numbers on a single line, or if you subscribe to a distinctive ring service provided by your
telephone company, then make sure that you set the correct ring pattern for the printer. Otherwise, the printer
will not receive faxes even if you have set it to receive faxes automatically.

Receiving faxes manually

1
Turn off Auto Answer:
From the printer control panel, navigate to:
> Setup > > Fax Setup >
2
When the telephone rings and you hear fax tones when you pick up the handset, press
on the telephone attached to the printer.
Warning—Potential Damage: Do not touch the cables or the
> Ringing and Answering >
> Ringing and Answering >
Faxing
90
> Auto Answer >
.
and ports while actively receiving a fax.
> Auto Answer >
and ports while actively receiving a fax.
> On >
to save the setting.
> Off >
on the printer or *9*