Wireless Networking - Lexmark Pro715 User Manual

Wireless Networking

Make sure:
• The SSID is correct.
Print a network setup page from the printer to check the network settings.
•
Your WEP key or WPA passphrase is correct (if your network is secure).
Log in to the wireless access point (wireless router) and check the security settings.
If you are not sure if your security information is correct, run the wireless setup again.
• The printer and the computer are within the range of the wireless network.
For most networks, the printer and the computer should be within 100 feet (30 meters) of the wireless access
point (wireless router).
•
The Wi‑Fi indicator light is lit and is solid green.
• The computer and printer are both connected to the same wireless network.
•
The printer is located away from obstacles or electronic devices that could interfere with the wireless signal.
Make sure the printer and wireless access point are not separated by poles, walls, or support columns containing
metal or concrete.
Many devices can interfere with the wireless signal, including baby monitors, motors, cordless phones, security
system cameras, other wireless networks, and some Bluetooth devices.
•
The computer is not connected to a VPN.
• Any non‑Microsoft firewalls on the computer are updated to the most recent version and allow the printer
software to communicate over the network.
The Continue button is unavailable
Try the following solutions in the order they appear until the Continue button becomes active and available:
C USB
HECK IF THE CABLE IS SECURELY PLUGGED INTO THE
PRINTER
USB ports are marked with
M
AKE SURE THE PRINTER IS PLUGGED IN AND TURNED ON
Make sure the button is lit. If you have just turned on the printer, then you might need to disconnect the USB
cable and then reconnect it.
M USB
AKE SURE THE
Test the USB port by connecting other devices to it. If you can successfully use other devices from the port, then
the port is working.
Notes:
• Your port may be working fine, but certain conflicts can occur with multiple USB devices. Try disconnecting
one of your other USB devices.
•
If the USB port on the computer is not working, then try using the other USB ports on the computer.
.
PORT ON THE COMPUTER IS WORKING
USB
PORTS ON BOTH THE COMPUTER AND THE
Troubleshooting
162