Component Specifications; Performance Specifications - 3M PROTECTA 3100418 Manual

;
Before using this equipment, record the product identification information from the ID label in the 'Inspection and
Maintenance Log' at the back of this manual.
DESCRIPTION:
Figure 1 illustrates the Rebel SRD(s) covered by this instruction manual. Figure 2 identifies key components of the 3M™
DBI-SALA Rebel Extended Length Twin Self-Retracting Device (SRD). Rebel SRDs are drum wound Web Lifelines (A) that retract
®
into a Nylon Housing (B). A Harness Interface (C) mounts two Rebel SRDs on the back of a Full Body Harness (D). A Rebar
Hook (E) on the end of each Lanyard provides continuous fall protection (100% tie-off) while ascending, descending, or moving
laterally.

Component Specifications:

SRL Housings
Web Lifeline
Energy Absorber
SRL Components
Hook

Performance Specifications:

Maximum Arresting Force
Average Arresting Force
Arrest Distance (Anchored Overhead)
Maximum Free Fall Distance Allowed
Minimum Fall Clearance
Table 1 – Specifications
MATERIAL
Nylon, UV Resistant
Polyester Web
Web: Vectran/Polyester
Cover: Vinyl
Aluminum Alloy, Alloy Steel, Stainless Steel
Zinc Plated Steel
1,350 lbs (6 kN)
900 lbs (4 kN)
3.5 ft (1.07 m)
5 ft. (1.5 m) with 310 lb (141 kg) Capacity
See Figure 4
8
STRENGTH
5,000 lbs (22 kN), Gate: 3,600 lb (16 kN)