Table of Contents
Advertisement
Quick Links
1
2
3
3100468
3101322
3101324
3101326
3101365
3101366
3101367
3101368
3101373
3101374
3101562
3101563
3101565
3101685
OSHA 1910.140
OSHA 1926.502
4
x2
3
2
2
2
p
2
2
2
2
2
p
2
p
1
p
1
p
1
p
4
p
1
2
3
SeLF-ReTRAcTiNg LiFeLiNeS
USER INSTRUCTIONS
1
1
2
3
p
p
p
p
p
p
p
p
p
4
5
6
Nano-Lok™
5903610 R
. D
Ev
LL
4
5
6
7
1
(2.7 m)
p
1
(2.7 m)
1
(2.7 m)
2
(2.7 m)
1
(2.7 m)
1
p
(2.7 m)
1
(2.7 m)
1
(2.7 m)
2
(2.7 m)
2
(2.7 m)
11 ft
1
p
(3.3 m)
11 ft
1
(3.3 m)
11 ft
1
(3.3 m)
p
2
(3.3 m)
7
€
x 1
OSHA
9 ft
420 lbs
(190 kg)
9 ft
420 lbs
(190 kg)
9 ft
420 lbs
(190 kg)
9 ft
420 lbs
(190 kg)
9 ft
420 lbs
(190 kg)
9 ft
420 lbs
(190 kg)
9 ft
420 lbs
(190 kg)
9 ft
420 lbs
(190 kg)
9 ft
420 lbs
(190 kg)
9 ft
420 lbs
(190 kg)
420 lbs
(190 kg)
420 lbs
(190 kg)
420 lbs
(190 kg)
9 ft
420 lbs
(190 kg)
© 3M 2020
Advertisement
Table of Contents
Related Manuals for 3M Nano-Lok 3100468
Summary of Contents for 3M Nano-Lok 3100468
- Page 1 (190 kg) 11 ft 420 lbs 3101562 (3.3 m) (190 kg) 11 ft 420 lbs 3101563 (3.3 m) (190 kg) 11 ft 420 lbs 3101565 (3.3 m) (190 kg) 9 ft 420 lbs 3101685 (3.3 m) (190 kg) © 3M 2020...
- Page 3 3101685 3101685...
- Page 4 FC = FF+DD+SF (1.8) (1.5) (1.2) (0.9) (0.6) (0.3) (0.3) (0.6) (0.9) (1.2) (1.5) (1.8) (0.6) (1.8) (1.5) (1.2) (0.9) (0.6) (0.3) (0.3) (0.9) (1.2) (1.5) (1.8) 4.0 ft (1.2 m) 5.0 ft (1.5 m) (2.4) 6 ft (1.8 m) (2.4) 7 ft (2.1 m) (2.1)
- Page 5 Step 2 Step 1...
- Page 12 Models Models 3101365 3101365 3101366 3101367 3101367 3101368 3101368 3101366 3101373 3101370 3101374 3101371...
- Page 13 Models Models 3101322 3101322 3101324 3101324 3101326 3101326 Models Models Models 3101566 3101562 3101562 3101567 3101563 3101563 3101569 3101565 3101565 3101566 3101567 3101569 Model 3100468 3101685...
-
Page 14: Safety Information
Ensure there is adequate fall clearance when working at height. Never modify or alter your fall protection equipment. Only 3M or parties authorized in writing by 3M may make repairs to the equipment. Prior to use of fall protection equipment, ensure a rescue plan is in place which allows for prompt rescue if a fall incident occurs. -
Page 15: Component Specifications
Before using this equipment, record the product identification information from the ID label in the ‘Inspection and Maintenance Log’ at the back of this manual. Always ensure you are using the latest revision of your 3M instruction manual. Visit the 3m website or contact 3M Technical Services for updated instruction manuals. - Page 16 Do not work above the level of your anchorage. • Do not lengthen SRDs by connecting a lanyard or similar component without consulting 3M. For product-specific information relating to free fall and fall clearance values, please refer to Table 1 of this instruction.
- Page 17 Do not use equipment that is not compatible. Ensure all connectors are fully closed and locked. 3M connectors (snap hooks and carabiners) are designed to be used only as specified in each product’s user’s instructions. See Figure 6 for examples of inappropriate connections. Do not connect snap hooks and carabiners: To a D-ring to which another connector is attached.
-
Page 18: Installation
3.0 Installation PLANNING: Plan your fall protection system before starting your work. Account for all factors that may affect your safety before, during, and after a fall. Consider all requirements and limitations defined in Section 2. In most applications, the Nano-Lok Tie Back SRD can be connected to the anchorage or the harness Dorsal location. Either orientation is allowed;... - Page 19 Position the Harness Interface around the Web Straps: With the Gate facing up, insert the Nose of the Connector (F) behind the Web Straps (A). Rotate the Connector behind the Web Straps until the Connector surrounds the the Web Straps. Add the second SRD on the Harness Interface: Slide the SRD’s Swivel Eye (G) over the Nose of the Connector (F) and position the SRD Swivel Eye in the Nose End of the Connector (I).
-
Page 20: Operation
4.0 Operation First time or infrequent users of Self-Retracting Devices (SRDs) should review the “Safety Information” at the beginning of this manual prior to use of the SRD. BEFORE EACH USE: Before each use of this fall protection equipment carefully inspect it to assure it is in good working condition. -
Page 21: Maintenance, Service, And Storage
Only 3M or parties authorized in writing may make repairs to this equipment. PRODUCT LIFE: The functional life of 3M Self-Retracting Devices is determined by work conditions and maintenance. As long as the product passes inspection criteria, it may remain in service. - Page 22 Table 3 – Inspection and Maintenance Log Serial Number(s): Date Purchased: Model Number: Date of First Use: Inspection Date: Inspected By: Component: Inspection: Pass Fail (See Section 2 for Inspection Frequency) Inspect for loose fasteners and bent or damaged parts. (Figure 25) Inspect the Housing (A) for distortion, cracks, or other damage.
- Page 23 Corrective Action/Maintenance: Approved By: Next Inspection Due: Date: Corrective Action/Maintenance: Approved By: Next Inspection Due: Date: Corrective Action/Maintenance: Approved By: Next Inspection Due: Date: Corrective Action/Maintenance: Approved By: Next Inspection Due: Date: Corrective Action/Maintenance: Approved By: Next Inspection Due: Date: Corrective Action/Maintenance: Approved By: Next Inspection Due:...
- Page 24 LIMITED REMEDY: Upon written notice to 3M, 3M will repair or replace any product determined by 3M to have a factory defect in workmanship or materials. 3M reserves the right to require product be returned to its facility for evaluation of warranty claims. This warranty does not cover product damage due to wear, abuse, misuse, damage in transit, failure to maintain the product or other damage beyond 3M’s control.
Need help?
Do you have a question about the Nano-Lok 3100468 and is the answer not in the manual?
Questions and answers