Component Specifications; Performance Specifications - 3M DBI SALA LAD-SAF 5000335 User Instructions

Mobile rope grab

Hide thumbs

Table Of Contents

Table of Contents

;

Before using this equipment, record the product identification information from the ID label in the 'Inspection and

Maintenance Log' at the back of this manual.

System Specifications:

Capacity:

One person with a combined weight (including clothing, tools, etc.) between 130 lb. - 310 lb. (59 kg -

140 kg).

Anchorage:

The required Anchorage Strength depends on the application:

Fall Arrest: Anchorages selected for Fall Arrest systems shall have a strength capable of sustaining

static loads applied in the directions permitted by the system of at least:

1. 5,000 lbf (22.2 kN) for non-certified anchorages, or

2. Two times the maximum arresting force for certified anchorages.

When more than one Fall Arrest system is attached to an anchorage, the strengths set forth in (1) and

(2) above shall be multiplied by the number of systems attached to the anchorage.

Restraint: Anchorages selected for Restraint systems shall have a strength capable of sustaining

static loads applied in the directions permitted by the system of at least:

1. 1,000 lbf (4.5 kN) for non-certified anchorages, or

2. Two times the forseeable force for certified anchorages.

When more than one Restraint system is attached to an anchorage, the strengths set forth in (1) and

(2) above shall be multiplied by the number of systems attached to the anchorage.

;

certified anchorage as specified in these instructions.

Standards:

Each product model is certified to, or conforms with, the applicable standards and regulations listed

within Figure 1. If none are specified, then all standards and regulations listed on the cover apply.