Connecting To Wlan Location Engine 2340 Through Initial Administration Gui; Nortel Wlan Location Engine 2340 Initial Administration Gui; Initial Administration Gui Access; Initiate Login - Nortel 2340 Configuration Manual

Connecting to WLAN Location Engine 2340 through Initial Administration GUI 21

Connecting to WLAN Location
Engine 2340 through Initial
Administration GUI

Nortel WLAN Location Engine 2340 Initial Administration GUI . . . . . . . . . . . . . . . 21

Initial Administration GUI Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Initiate Login . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Note.
For more information about Setting up the Nortel WLAN Location Engine 2340, refer to
the 'Software Installation' chapter in Nortel WLAN — Location Engine 2340 Installation.
Nortel WLAN Location Engine 2340 Initial
Administration GUI
The Nortel WLE2340 Initial Administration GUI can be accessed through HTTPS.
Note.
page that displays the error message 'HTTP Status 500', it means that WLE2340 start has
not finished. Wait a moment, and then select the browser's refresh button.
Initial Administration GUI Access
To access the Nortel WLE2340's Initial Administration GUI through a secure connection, enter the following URLs into
your browser: https://<WLE2340_IP_Address>:8003.
Initiate Login
When you attempt to access the Nortel WLE2340 Administration GUI for the first time, it will offer a form for the first
user and password. This user is added to the admin role automatically.
Before logging to Initial Administration GUI, you have to setup the WLE2340.
When you enter the URL for the Nortel WLE2340, if you are redirected to a
Nortel WLAN - Location Engine 2340 Configuration - Using Interfaces