Servo State Mode - Canon Omnera 500A Operator's Manual

User Interface
Automatic Collimator Control

3.2.12 Servo State Mode

Fig. 3-30 Servo state mode
1. Automatic mode
2. Manual mode
OMNERA®
1
2
1000-095-071-EN Rev. 1.1
The Servo state can be either Automatic
mode (1) or Manual mode (2).
A pop-up window according to Fig. 3-30
Servo state mode, will appear with two al-
ternatives. When the System is in Manual
mode all movements are allowed and expo-
sure can be performed in any position, also
outside the detector.
For further information about Manual mode,
see corresponding section.
Page 80
Operator´s Manual
2020-09-14