Table of Contents
Advertisement
Getting Started With The System
Hardware Installation
The following are general instructions for installing the card. Consult your
computer user manual or technical reference manual for specific instructions and
warnings.
Installing an ExpressCard Module
Because a laptop is not grounded, follow this procedure to safely connect it to
your PXI system:
1 Unpack the ExpressCard module as directed in the previous section.
2 Touch the ExpressCard module and a metal part of the PXI chassis
3 Connect the cable to the ExpressCard module and the M9005A chassis.
4 Plug the ExpressCard module into an available ExpressCard slot.
If your computer is already running (or hibernating) when you install ExpressCard
module, you must reboot to detect the PXI system. Otherwise, the PXI system is
detected when you start your computer.
Figure 9
Keysight M9005A PXIe Chassis User Guide
The software for your kit is included with the M9005 PXIe Chassis
Product Software and Information CD.
simultaneously.
shows how to insert the ExpressCard module and connect the cable.
Installation and Configuration
19
Advertisement
Table of Contents
