Interior Cleaning; Exterior Cleaning - Keysight M9005A User Manual

Maintenance

Interior Cleaning

Use a dry, low-velocity stream of air to clean the interior of the chassis. Use a
soft-bristle brush for cleaning around components.

Exterior Cleaning

Clean the exterior surfaces of the chassis with a dry lint-free cloth or a
soft-bristle brush. If any dirt remains, wipe with a cloth moistened in a mild soap
solution. Remove any soap residue by wiping with a cloth moistened with clear
water. Do not use abrasive compounds on any part of the chassis.
34
- Avoid getting moisture inside the chassis during exterior
cleaning, especially through the top vents. Use just enough
moisture to dampen the cloth.
- Do not wash the front- or rear-panel connectors or switches.
Cover these components while cleaning the chassis.
- Do not use harsh chemical cleaning agents; they may damage
the chassis. Avoid chemicals that contain benzene, toluene,
xylene, acetone, or similar solvents.
Keysight M9005A PXIe Chassis User Guide