Verify Hardware Installation - Keysight N9020B Installation Note

Verify Hardware Installation

1. Turn on the analyzer and wait for the instrument to fully boot up.
2. Verify the spectrum analyzer application loads and sweeps as expected. Press System, Show
Hard ware on the analyzer and verify that the Main board and the
themselves as:
— BBIQ
— BBIQ Interface
Licensing the Option
Installation Procedure over USB
1. Locate the Option Upgrade Entitlement Certificate (5964-5178) from the kit.
2. Redeem the Option Upgrade Entitlement Certificate by following the instructions on the
Certificate.
3. After redeeming your Option Upgrade Entitlement Certificate you will receive an email with an
attached License File.
4. Locate a USB storage device. Perform a virus scan on this device before use.
5. Save the License File to the root directory of the USB storage device.
6. Connect the USB storage device to one of the MXA USB ports. Windows will detect the new
hardware and may display the configuration menu shown in
configured according to your preferences.
Figure 19 USB Storage Device Configuration Menu
Installation Note N9020-90257
Option BBA, Analog Baseband I/Q Inputs Retrofit Kit
Figure
BBIQ Interface Board
19. This menu may be
identify
27