Cabling - Keysight M9005A User Manual

Installation and Configuration
Figure 11
controls the M9005A chassis.
1 M9005A Chassis
2 Chassis Controller Connector
Figure 11 PCI Express Host Card Cable Connection

Cabling

Connect the appropriate cable to the PCI Express card and M9005A chassis.
The cables have no polarity, so either end may be connected to either connector.
22
shows the cable connection with which a PCI Express host card
1
3
2
not
Do remove the cable after the system is powered up. Doing so
can hang or cause errors in applications communicating with
devices.
If a cable becomes unplugged, do
system. Complete the following steps when a cable is unplugged:
1 Power down the PC.
2 Power down the chassis
3 Reconnect the cable.
4 Power up the chassis.
5 Power up the PC.
Getting Started With The System
3 Cable Connector
not
plug it back into the
Keysight M9005A PXIe Chassis User Guide