Hardware Installation - Keysight CXA N9000A Installation Note

3. Hardware Installation

CAUTION Electrostatic discharge (ESD) can damage or destroy electronic components. All
work on electronic assemblies should be performed at a static-safe workstation.
Refer to the documentation that pertains to your instrument for information about
static-safe workstations and ordering static-safe accessories.
Removal
1. Turn off the instrument and remove the power cord from the rear panel.
2. Refer to Figure 2. Remove the existing CPU assembly from the instrument by removing the 6 rear
panel screws (1). The CPU assembly can be removed from the chassis by pulling straight out the
back. Use the two ejectors to pull the CPU assembly out from the chassis.
Figure 2 CPU Assembly Removal
Installation Note
N9000-90030
Option PC3 - Single Core High Performance Processor Upgrade Kit
7