Installing A Pci Express Host Card - Keysight M9005A User Manual

Installation and Configuration
1 x1 Cable
Figure 9

Installing a PCI Express Host Card

The following steps detail the process of installing an PCI Express host card.
Refer to
1 Power off your computer, but leave it plugged in while installing the
2 Remove the top cover or access port to the PCI Express bus.
3 Select any available PCI Express expansion slot (x1 or wider).
20
2
1
Installing the ExpressCard Module
Figure 10 to assist you in completing this procedure.
PCI Express host card. The power cord grounds the chassis and protects it
from electrical damage while you install the card.
To protect both yourself and the computer from electrical
hazards, your computer should remain off until you finish
installing the PCI Express host card.
The BIOS or motherboard may not support the PCI Express
host card in a slot intended for a graphics card.
3
2 ExpressCard Slot
Keysight M9005A PXIe Chassis User Guide
Getting Started With The System
3 Portable Computer