2.1.5
Remove the Heat Discharge Fan
1) Remove the upper cover (See 2.1.1.7
"Removing the Upper Cover")
2) Remove the printer controller PCB. (if
equipped with printer functions; See
2.5.5 "Removing the Printer Controller
PCB")
3) Remove the NCU PCB. (if equipped
with fax functions; See 2.2.6 "Remov-
ing the NCU PCB")
4) Remove the modular jack PCB. (if
equipped with fax functions; See 2.2.7
"Removing the Modular Jack PCB")
5) Remove the 6 screws [1], and detach the
printer controller PCB base [2].
6) Remove the 5 screws [3], and detach the
image processor PCB base [4].
COPYRIGHT © 2001 CANON INC.
Chapter5.p65
[1]
[3]
CANON imageCLASS D600s/PC1060s/PC1200s/iR1200s REV. 0 SEPT. 2001
13
CHAPTER 5 MECHANICAL SYSTEM
[2]
F05-201-21
[3]
[4]
F05-201-22
8/26/01, 3:45 PM
[1]
[1]
5-13