Adjusting The Trailing Edge; When Replacing A Component; When Replacing The Image Processor Pcb - Canon imageCLASS D600s Service Manual

Hide thumbs Also See for imageCLASS D600s:

Table of Contents

CHAPTER 7 TROUBLESHOOTING

1.3.4.5 Adjusting the Trailing Edge Margin

(feeding direction)

You will need to perform some additional work if you have replaced a component; go

through the following for the item of work and steps to take:

Perform the following if you have replaced the image processor PCB:

Chapter7A.p65

Copy of the test sheet

CANON imageCLASS D600s/PC1060s/PC1200s/iR1200s REV. 0 SEPT. 2001

Trailing edge margin

8/26/01, 3:48 PM

Troubleshooting

Pc1060s Pc1200s Ir1200s