Canon imageCLASS D600s Service Manual page 310

#021 [RX]
Cause:
Remedy:
#022 [TX]
Cause:
Remedy:
#025 [TX/RX]
Cause:
Remedy:
#037 [RX]
Cause:
Remedy:
#059 [TX]
Cause:
Remedy:
Cause:
Remedy:
#080 [TX]
Cause:
Remedy:
COPYRIGHT © 2001 CANON INC.
Chapter7C.p65
The other party has rejected the machine during polling reception
When starting a call, a subaddress, or a subaddress and a password, was not speci-
fied.
Specify a subaddress, or a subaddress and a password, when starting a call.
The data for an auto-dial number used when selecting a party was deleted.
Register the telephone number of the other party as an auto-dial number, and
transmit once again.
Auto-dial setting is wrong
The settings require registration of a subaddress for auto-dialing; however, a call
was attempted without registering a subaddress.
If auto-dialing is of a type requiring registration of a subaddress, register a
subaddress.
Memory has overflowed when receiving images
The image memory overflowed during reception.
Delete image data that is no longer needed, and ask the operator of the other party
to transmit once again.
Dialed number and the connected number (CSI) do not match
The user telephone number is not registered correctly on the receiving side.
1. Ask the operator of the receiving side to register the user telephone number cor-
rectly.
2. Use manual transmission; then, after making sure that a connection has been
made, transmit once again.
The exchange malfunctioned, and the machine is not connected to the dialed
party.
Have the exchange checked.
The other party is not equipped with an ITU-T-compliant
subaddress reception function
Bit 49 of DIS received from the other party is '0'.
1. Transmit to a fax machine equipped with a subaddress function.
2. Use normal G3 transmission.
CANON imageCLASS D600s/PC1060s/PC1200s/iR1200s REV. 0 SEPT. 2001
55
CHAPTER 7 TROUBLESHOOTING
Call fails
8/26/01, 3:49 PM
7-55