Table of Contents
Advertisement
CHAPTER 7 TROUBLESHOOTING
#081 [TX]
Cause:
Bit 50 of DIS received from the other party is '0'.
Remedy:
1. Transmit to a fax machine equipped with a password function.
2. Use subaddress transmission that does not use a password.
3. Use normal G3 transmission.
#082 [RX]
Cause:
Bit 47 of DIS received from the other party is '0'.
Remedy:
Ask the operator to set normal polling transmission, and use polling reception.
#083 [RX]
Selective polling address or the password does not match during
Cause:
The selective polling address or the password of the machine does not match that
of the other machine.
Remedy:
Match the selective polling address and the password of the machine with that of
the other party.
#084 [RX]
Cause:
Bit 50 of DIS received from the other party is '0'.
Remedy:
Use selective polling that does not use a password.
#995 [TX/RX]
Memory transmission reservation clear/memory reception image clear
Cause:
In the case of transmission, the user canceled the memory transmission reserva-
tion.
Remedy:
Transmit once again.
Cause:
In the case of reception, the user deleted the image that had been received in
memory reception.
Remedy:
Ask the operator of the other party to transmit once again.
7-56
COPYRIGHT © 2001 CANON INC.
Chapter7C.p65
The other party is not equipped with an ITU-T-compliant pass-
word reception function
The other party is not equipped with an ITU-T-compliant selec-
tive polling transmission function
ITU-T-compliant selective polling reception
The other party is not equipped with a password function for
ITU-T-compliant selective polling reception
CANON imageCLASS D600s/PC1060s/PC1200s/iR1200s REV. 0 SEPT. 2001
56
8/26/01, 3:49 PM
Advertisement
Table of Contents
Troubleshooting
