Removing The Printer Controller Pcb; Removing The Ncu Pcb - Canon imageCLASS D600s Service Manual

CHAPTER 5 MECHANICAL SYSTEM
2.2.5

Removing the Printer Controller PCB

1) Remove the rear cover. (See 2.1.1.1
"Removing the Rear Cover")
2) Disconnect the connector [1].
3) Remove the 5 screws [2], and detach the
printer controller PCB [3].
2.2.6

Removing the NCU PCB

1) Remove the rear cover. (See 2.1.1.1
"Removing the Rear Cover")
2) Disconnect all connectors form the
NCU PCB.
The number of connectors
differs from model to
model and from country to
country.
3) Remove the 4 screws [2], and detach the
NCU PCB [1].
5-24
COPYRIGHT © 2001 CANON INC.
Chapter5.p65
CANON imageCLASS D600s/PC1060s/PC1200s/iR1200s REV. 0 SEPT. 2001
24
[2]
[1] [2]
F05-202-17
[2]
[1]
[2]
F05-202-18
8/26/01, 3:46 PM
[3]