Adf (If Equipped With Adf Functions) - Canon imageCLASS D600s Service Manual

1.7

ADF (if equipped with ADF functions)

Items
Pickup
Original type
Original size
Original orientation
Original position
Original processing mode
Original reading
Stack
Mixed original sizes
Original AE detection
Original size recognition
Stamp
Power supply
Operating environment
The machine may not be able to handle the following types of originals:
• original with a carbon back
• original made of multiple layers (pasted, bound)
• original with a cut-off, 5 or more holes, or tear
• original with a clip, adhesive tape, or glue
• original with curling, wrinkling, or appreciable bending
• transparency
Advise the user to remove as much curling as possible, if any, and place the original in the
original tray so that the side with the curling is the trailing edge.
The foregoing specifications are subject to change for product improvement.
COPYRIGHT © 2001 CANON INC.
Chapter1.p65
Auto pickup/delivery (top separation by double-pad)
Single-sided sheet (50 to 128 g/m
A4R, B5R, A5R, B6, LGL, LTRR, STMTR
Length: 128 to 356 mm, width: 139 to 216 mm
Face-down
Center reference
From single-sided to single-sided
Stream reading
30 sheets or less (if A4/LTR or smaller)
15 sheets or less (if LGL)
Yes (only if of the same paper configuration)
No
No
No
From host (5 VDC and 24 V)
Same as host
CANON imageCLASS D600s/PC1060s/PC1200s/iR1200s REV. 0 SEPT. 2001
7
CHAPTER 1 PRODUCT OUTLINE
Specifications
2
)
8/26/01, 3:40 PM
1-7