Error Transmission Report - Canon imageCLASS D600s Service Manual

3.20.2.1 Error Transmission Report (for service)
A service error code list and an error dump list may be attached to the error transmission
report. To do so, use service SSSW-SW01 in service mode.
If 'attach' is selected for 'transmission image' under 'transmission result report' of [RE-
PORT SETTING] in user mode, a part of the 1st page of the transmission image will be at-
tached when memory transmission is used.
*1: service for code.
*2: START ITEM; date and time (in 24-hr notation).
*3: OTHER PARTY; telephone number sent from other party.
*4: MAKER CODE; manufacture code.
*5: MACHINE CODE; MODEL CODE.
*6: bits 1 through 48 of received DIS, DCS, or DTC.
*7: bits 1 through 48 of received DIS, DCS, or DTC.
*8: RX: received procedure signal.
TX: transmitted procedure signal.
COPYRIGHT © 2001 CANON INC.
Chapter2.p65
F02-320-07
CANON imageCLASS D600s/PC1060s/PC1200s/iR1200s REV. 0 SEPT. 2001
81
CHAPTER 2 USING THE MACHINE
8/26/01, 3:42 PM
2-81