2.4
Fitting the Cartridge
1) Unpack the cartridge, and take it out
without removing its wrappings.
2) While pulling on the copyboard locking
lever, slide out the reader unit to the
left, and open the cartridge cover.
3) Rock the cartridge left and right about 5
to 6 times to even out the toner inside it.
4) Picking the tab, pull out the tape slowly.
When doing so, be sure to place the car-
tridge on a level surface, and hold it
firmly in place. However, take care not
to push down on the photopositive
drum through the shutter.
COPYRIGHT © 2001 CANON INC.
Chapter3.p65
Work
CANON imageCLASS D600s/PC1060s/iR1200s REV. 0 SEPT. 2001
5
CHAPTER 3 INSTALLATION
Checks/remarks
8/26/01, 3:43 PM
3-5