Requirements For Mounting; Basic Requirements; Mounting Environment Requirements - Alpha ESS SMILE5 Installation, Operation & Maintenance Manual

Mounting

5.3. Requirements for Mounting

Danger to life due to fire or explosion
Despite careful construction, electrical devices can cause fires.
Do not mount the system in areas containing highly flammable materials or

gases.
Do not mount the system in potentially explosive atmospheres.


5.3.1. Basic Requirements

The SMILE5-INV inverter is suitable for indoor and outdoor use.

For battery pack, we have both indoor version and outdoor version, please check
the batter type label.
Do not install the inverter in a place where a person can easily touch it because its

housing and heatsink are hot during operation.
Do not mount the system in areas with flammable or explosive materials.

Do not mount the inverter at a place within children's reach.

Do not mount the system outdoors in salt areas because it will be corroded there

and may cause fire. A salt area refers to the region within 500m from the coast or
prone to sea breeze. The regions prone to sea breeze vary depending on weather
conditions (such as typhoons and monsoons) or terrains (such as dams and hills).

5.3.2. Mounting Environment Requirements

The system must be mounted in a well-ventilated environment to ensure good

heat dissipation.
When mounted under direct sunlight, the power of the system may be derated

due to additional temperature rise.
Mount the system in a sheltered place or mount an awning over the product.

The optimal temperature range for the battery pack to operate is from15 to 30℃.

Do not expose or place near water sources like downspouts or sprinklers.

If the battery pack is mounted in the garage, then ensure that it is above the

height of the vehicle bumper and/ or door.
35