Alpha ESS SMILE5 Installation, Operation & Maintenance Manual page 26

24
Step12: If you use CT meter, please set
CT meter enable and the relevant ration
Step14: Click System in the setting
menu. Click Date &Time and set up the
date and time.
It is needed to set the following 3 parameters for manual mode:
IP Address: IP address;
Subnet Mask: Subnet mask;
Default Gateway: Default gateway;
Automatic display one parameter:
MAC Address: display MAC Address.
Product Introduction and Application Scenarios
Step13:
please set the mute as YES in UPS
System interface and the relevant
Frequency.
Step15:
address. DHCP mode means that
setup IP address is set up
automatically.
If you want to set up the IP address
manually, please choose manual
mode.
If you use UPS function,
Click Ethernet to set the IP